Sharp LL-T15V1 Connecting the monitor and turning the monitor on and off, Turning the power off

Connecting the monitor and turning the monitor on and off

English

Note:

-If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment.

-Depending on the computer or OS, it may be necessary to use the computer to install monitor set-up information. If so, follow the steps below to install the monitor set-up information.

Turning the power off

1.Turn the computer off.

2.Press the monitor's power button. The Power LED will disappear.

If the monitor is not going to be used for a long period of time, be sure to unplug it from the AC outlet.

Turn off device to which monitor is connected

OFF

Press power button

Installing set-up information and the ICC profile (for Windows)

Depending on the computer or OS, it may be neces- sary to use the computer to operate the installation of monitor set-up information etc. If so, follow the steps below to install the monitor set-up information. (Depending on the type of computer or OS, com- mand names and methods may differ. Please follow the computer’s own operation manual while reading this.)

About the ICC profile

An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized.

-Windows98, WindowsMe and Windows2000 all use the ICC profile.

-When installing Windows98, WindowsMe and Windows2000 set-up information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to Installing the ICC profile on page 15.

-When using the ICC profile, please set the [WHITE BALANCE] to [STD] .

Installing set-up information

For Windows95

Installing monitor set-up information into Windows95. This explanation assumes that the floppy disk drive is "A drive".

1.Place the Utility Disk (provided) into the compu- ter's A drive.

2.Click on the [Start] button. From [Settings], choose [Control Panel].

3.Double click on [Display].

4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].

5.Click on [Have disk], confirm that [Copy manufac- turer's files from:] is [A:] then click [OK].

6.Confirm that the monitor details are selected, and click [OK].

7.Check that the monitor details are displayed, then click [Apply].

8.Click [OK], and close the window.

9.Remove the Utility Disk from the A drive.

13