![](/images/new-backgrounds/1289084/28908443x1.webp)
Adjusting the screen display (With digital connection)
Adjustments can be made using On Screen Display (OSD) Menu provided.
On Screen Display for adjustment
If you are using Windows, open the Adjustment Pattern on the accompanying
If your system is not Windows, you can not use the Adjustment Pattern. Therefore display an image that makes the entire screen light and adjust it through checking visually its actual tone.
How to adjust
1.Press the MENU button.
The COLOR CONTROL Menu will be displayed.
At this point relevant menu options can be adjusted.
Each time the MENU button is pressed the next menu is selected. (COLOR CONTROL → MODE SELECT → OSD Menu disappears)
Notes:
-The OSD Menu automatically disappears approximately 30 seconds after the last command.
COLOR CONTROL Menu
Notes:
-To choose a menu option: SELECT button
-To go to the next menu: MENU button
COLOR MODE
Color tone can be set as below.
STD ..... Displays image with the color tone
results from original scheme of liquid crystal panel.
sRGB ... sRGB is international standard of color representation specified by IEC (International Electrotechnical Commission). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to it original image.
VIVID ... Displays an image with dynamic and VIVID primary colors.
-If [sRGB] or [VIVID] has been selected, items subsequent to [WHITE BALANCE] cannot be set.
Subsequent items can be set when the [COLOR MODE] is [STD].
WHITE BALANCE
After selecting [WHITE BALANCE], press the but- ton and display the adjustment menu.
Notes:
-On settings other than [STD] not all gradations can be displayed. To display all gradations, set to [STD].
-Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].
-Selecting USER will display the setting values for
-Use the SELECT button to select
-When adjustment complete: MENU button
22