Connecting the monitor and turning the monitor on and off
Turning the power on | Changing between input terminals |
1. Turn on the main power of the monitor. | Use the INPUT button to switch between signal input |
| terminals. |
|
| Input terminal 1 |
| Input terminal 2 | ||
|
|
|
|
|
|
|
Main power switch |
|
|
|
|
|
|
|
| INPUT | ||||
|
| |||||
|
| < | > |
| < | > |
|
|
|
|
|
|
|
The input signal type (ANALOG/DIGITAL) is displayed within angle brackets < >.
-When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction.
2.Press the monitor's POWER button. The power LED will light up orange.
3.Turn on the computer.
| Turn on the computer | |
Press power button | ||
power supply. | ||
| ||
|
|
ON
When a signal is input from the computer, the power LED lights up green, and the screen is displayed (After power is turned on, it may take a little time until the screen is displayed.)
-If the input terminal to which the computer is connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching. (right column)
Notes: (when using an analog signal)
-If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment (p. 18).
-When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the
English
15
