A P P E N D I X G

TA L K S W I T CH

A N D P O W E R I N T E R R U P T I O N S

TalkSwitch settings and configurations:

In the event of a power failure, your TalkSwitch settings and configurations will not be lost.

TalkSwitch’s feature settings (configuration) are stored in an EEPROM. An EEPROM is a form of non-volatile memory. Non-volatile memory means that your feature settings (configurations) remain in TalkSwitch’s memory despite interruptions in the power supply.

Calling Features:

In the event of a power failure, no TalkSwitch features or capabilities (including VoIP) will be available other than:

Local Extension, 114, 124, 134 and 144 can make or receive calls on Line 1 of their respective units.

In the event of a power return, all TalkSwitch features and capabilities will be re-established.

Mode Scheduling and Power Interruptions:

When the power supply to TalkSwitch has been interrupted, TalkSwitch’s internal clock will continue to run for up to 12 hours. If you have enabled TalkSwitch’s Automatic Mode Scheduling feature and it has been longer than 12 hours, TalkSwitch will not function properly until the internal clock is reset via a Caller ID call or with the TalkSwitch configuration software. When power is restored to TalkSwitch, TalkSwitch will check the time and determine the mode it should be in according to the configuration and set itself to that mode.

A P P E N D I X G

1 5 3

Page 161
Image 161
Talkswitch CT.TS005.001101.UK manual TalkSwitch settings and configurations, Calling Features