Expand the System Information folder and click VoIP Configuration.

In the “TalkSwitch Profile” tab

TalkSwitch has a built-in SIP Server Proxy/Registrar/Redirect server. This facilitates the configuration and maintenance for multi-branch and teleworker applications. One location needs to be assigned as the SIP Server to manage call requests between VoIP locations and the other locations need to register with the SIP Server location.

To facilitate calls between TalkSwitch locations, we recommend that you use TalkSwitch location codes 250-299 as phone numbers for each of your VoIP numbers. Do not assign duplicate numbers between any two locations.

This TalkSwitch location is the Proxy/Registrar:

If this location is designated to be the Proxy/Registrar Server, check this box. When it is enabled and other SIP devices are registered with this system, any calls made within the group contact this device to resolve the destination location. Once the destination is resolved, the call is made directly from the source location to the destination location.

The TalkSwitch Registrar supports Digest authentication. The Digest mechanism is a challenge/response protocol in which the client presents its credentials in response to a challenge from the server. This method of authentication is very secure. To enable authentication, select ‘yes (digest)’ from the drop-down list under Registrar Authentication.

2 4

T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D

Page 32
Image 32
Talkswitch CT.TS005.001101.UK manual TalkSwitch Profile tab