Proxy Server Name:
If this location is acting as the Proxy Server, it is filled in automatically. If this location is not the Proxy Server, then enter the IP address or domain name associated to the Proxy Server. If the Server is using a different port number than the default, specify the port number after a colon at the end of the domain or IP address.
Example 222.234.432.234:5061
Registrar Server Name:
If this location is acting as the Registrar Server, it is filled in automatically. If this location is not the Registrar Server, enter the IP address or domain name associated to the Registrar Server. If a VoIP enabled TalkSwitch unit is acting as the Server, both, the Proxy Server Location and Registrar Server Location fields should have the same information. If the Server is using a different port number than the default, specify the port number after a colon at the end of the domain or IP address.
Example VoIP .domain.com:5061
Outbound Proxy:
If TalkSwitch is being provisioned with a VoIP Service Provider, enter the Outbound Proxy associated with the Service Provider.
Realm/Domain:
If this location is the Proxy/Registrar, you can assign a realm/domain name to this unit. (for example, ‘domain.com’). Note: This field is only required when TalkSwitch is being provisioned with a VoIP service provider. In this case, enter the realm/domain associated with the service provider. If this unit is not the Proxy/Registrar, it must have the same realm as the Registrar Server.
User Name and Password Section
User/Account:
If this location is the Proxy/Registrar and you have enabled authentication, assign a User/Account name to this unit that will be required by all other locations for registration purposes. If this unit is not the Proxy/Registrar and if authentication is required, it must have the same User/Account name filled in as the Registrar Server.
T A L K S W I T C H C O N F I G U R A T I O N | 2 5 |