Select Notification Settings to specify how you want TalkSwitch to handle notification calls.
Pager:
Click the Pager check box if you want to be notified by pager when new messages arrive. Activate the feature and enter the pager number and the numeric message to be displayed on the pager.
Configuration Notification Options (button)
Define how TalkSwitch dials out of your office when notifying you of a voicemail. If the first connection is not successful, define the number of times and the intervals TalkSwitch continues to attempt the connection.
When you choose to be notified by pager and remote phone, TalkSwitch ensures that both locations have been contacted before finishing the notification process.
Dial notification phone number using:
Select the Hunt Group you want to use for the Remote Phone and Pager Notification calls. It allows you to adjust the number of rings before it aborts the attempt and follows the parameters listed in the next section.
If attempt unsuccessful, try again:
These parameters control how many times TalkSwitch tries to notify the Remote Phone or Pager before it aborts the entire notification attempt. You can specify the time interval between attempts.
Under the Message Waiting Light tab, set a message waiting light to indicate when a message has been received for an extension. Select the local extensions in your system where the light is activated when a message arrives. The message waiting light turns on at the extension associated with a local mailbox by default.
T A L K S W I T C H C O N F I G U R A T I O N | 4 9 |