Line CPC/Disconnect Clear

This parameter controls when the system assumes a call on a telephone line has been cleared from the network, by detecting a disconnection of the telephone line. It is set to a default value based on Location. Some telephone companies use a specific timed disconnect signal (K-Clear) to indicate when a call has been released. In other cases it is set to a value to release the call if the line is no longer connected to the network.

Ringback Control

If an extension seems to ring back as if a caller was on hold, but when answered, no one is there, it could indicate a debounce problem with the phone hook/switch. When someone at the extension hangs up, the handset bounces slightly to cause a recall signal that can be seen by TalkSwitch before the hang up. As a result, TalkSwitch puts the line on hold. To help with this problem, increase this value till it stops the ringbacks.

Fax Detection

If fax calls are not directed properly to the fax machine, you may need to set this option to detect 1 tone. If it is set to detect 1 tone and people complain they have accidentally been routed to the fax machine, then set this value to detect 2 tones.

T A L K S W I T C H C O N F I G U R A T I O N

8 5

Page 93
Image 93
Talkswitch CT.TS005.001101.UK manual Line CPC/Disconnect Clear, Ringback Control, Fax Detection