
At the Local Extension dial tone or at the Auto Attendant, dial # to enter command mode and enter a password (if required). Dial any of the following
Quick Commands and press the | # sign. |
Activate Mode 1: | 3 1 |
|
|
Activate Mode 2: | 3 2 |
|
|
Check Current Mode: | 3 0 |
|
|
Automatic Mode Switching using the Time Scheduler
Use the configuration software to activate TalkSwitch’s Time Scheduler feature. You can configure TalkSwitch to switch between Modes automatically by configuring the times for Mode changes in the ‘Modes’ window under Call Handling in the configuration software.
If you switch modes manually, TalkSwitch automatically switches to the proper mode during the next scheduled mode change.
3.7OUT OF THE OFFICE — MAKING CALLS WITH CALL BACK AND DISA (CALL BRIDGE)
Working together, Call Back and Call Bridge act as your personal long distance operator. Whether you are across town or around the world, these two features allow you to place calls from your office telephone line(s).
3.7.1 Using (Call Bridge)
Call Bridge allows you to place calls using your office telephone lines when you are not in the office. You can make a call to TalkSwitch, access a telephone line connected to TalkSwitch and enter the number you want to dial. This is especially useful when you are out of the office with your cell phone and need to dial a
How to use DISA (Call Bridge)
Dial into one of TalkSwitch’s Lines. When the Auto Attendant answers, select a Hunt Group (81 – 88 or 9) or Same Line Connect (80). You are then asked to supply your Account password to receive dial tone. If you are using Same Line Connect (80) and your line supports the
When you have completed your call (or if the telephone number dialed was busy), do one of the following:
1 0 4 | T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D |