2.3.3.5VoIP Numbers

The VoIP enabled TalkSwitch unit supports 4 VoIP lines per unit. Up to 12 VoIP phone numbers can be assigned for each unit so that unique call handling scenarios can be configured for up to 12 numbers. For example, you might assign a general number for customers to reach the main Auto Attendant greeting and configure up to 11 other numbers so that the inbound calls ring straight through to specific extensions in the office.

Activate phone numbers as required. If you had previously assigned numbers in the first slot for each of the VoIP numbers and performed a firmware update, the new layout will place these numbers in VoIP slots 1,4,7 and 10. Phone numbers need to be associated with the TalkSwitch network or a Service Provider network.

In the “TalkSwitch Profile” section:

All VoIP numbers are active when the system is first configured. Phone numbers need to be assigned so that inbound VoIP calls can be handled according to the configuration parameters set for VoIP numbers under the Call Handling section 2.3.5. Phone numbers can be one or more digits in length.

T A L K S W I T C H C O N F I G U R A T I O N

3 1

Page 39
Image 39
Talkswitch CT.TS005.001101.UK manual VoIP Numbers, TalkSwitch Profile section