Note: If you have two or more units networked and are running 3.22 firmware, TalkSwitch automatically copies the files to the other units on the LAN for update. Updating units remotely over IP is also supported with release 3.21. Units do not operate properly if they are networked together with mismatched firmware versions. To confirm all units are properly loaded, select ‘View Details’ on the ‘About TalkSwitch’ page in the configuration software. See below.
If the firmware update was unsuccessful, please follow the instructions through the update process again. If problems persist, please contact your reseller or TalkSwitch.
Note: Firmware updates do not alter your system configuration. In a major system update, it may be necessary for the configuration file to be reset to default values. In this case, reconfigure the entire system. During a major system update, TalkSwitch mentions any issues involved with the firmware update.
If you replaced your computer with a new one, please use the software that matches the latest version of firmware running on TalkSwitch. If obtained the software from our website, download the install file. All install files on our website have both, the entire software program and the latest firmware.
U S I N G T A L K S W I T C H | 1 0 9 |