Talkswitch CT.TS005.001101.UK manual Auto Call Back

important to remember that a small initial long distance charge is incurred at your current location when you activate Prompted Call Back.

Note: Prompted Call Back is not activated in the TalkSwitch configuration by default. You need to activate Prompted Call Back before you can use the feature. The Call Back out of the system to the number programmed always uses the same line that was dialed.

2.3.6.1Auto Call Back

TalkSwitch‘s Call Back/DISA features gives you access to your office-based long distance savings plan from anywhere around the world.

You can configure four Auto Call Back numbers. Select an Auto Call Back 1–4. Click the check box next to ‘Activate Auto Call Back x’ (x represents a number from 1 to 4).

Number to call back:

Enter the Call Back number exactly as you would normally dial the number (i.e. do not enter a line Hunt Group in the dialing string).

Use dialing prefix:

If you have to dial the same prefix every time when using Auto Call Back (i.e. long distance calling card number), enable ‘Use dialing prefix’. Enter the dialing prefix including any required pauses or feature keys like * or # . Use a comma to insert a 2-second pause. For example, if you want to disable Call Waiting and want to dial a long distance prefix before dialing the long distance number, enter the following:

T A L K S W I T C H C O N F I G U R A T I O N 7 1