*70,1010555,, This corresponds to * 70 for disabling the Call Waiting feature, a 2 second pause to wait for the new dial tone, 1010555 for the long distance prefix, and a 4 second pause to wait for the new dial tone before dialing the long distance phone number.
Number used to trigger Auto Call Back:
Select the line/phone number that you dial when out of the office to trigger Auto Call Back. TalkSwitch initiates the Call Back using the same line you initially called. You can make configuration changes to Auto Call Back by dialing into this phone number only.
Use Password on Call Back:
The password option is designed to give you security and to restrict the use of this particular Call Back number. Enter a 4- to
Use Announced Message:
We recommend this option if the number TalkSwitch calls back is to a hotel or a location where a third party answers the call. The Announced Message option allows you to record a message that plays when the call is initially answered during a Call Back. For example, “Please transfer this call to Bob in room 307”. The Announced Message can be recorded locally using an extension handset or remotely by accessing Call Back from the Auto Attendant. The Record message button gives the instructions as follows:
Pick up a telephone handset connected to the TalkSwitch and use the following keypad commands to record the specific Auto Call Back Announced Message:
1. Press # to enter command mode. Enter the password if required.
2. Enter the appropriate command as listed below. After each command,
press # | to confirm the entry. |
|
Auto Call Back | Recording | Playback |
|
|
|
1 | 61 | 71 |
2 | 62 | 72 |
3 | 63 | 73 |
4 | 64 | 74 |
7 2 | T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D |