Local extensions can transfer employees to access voicemail by pressing ‘recall’, then pressing * * and entering the mailbox number.
If Direct Line Access is enabled, be sure to press ‘recall’ before trying to access your mailbox.
Note: If you have a line configured to go straight to voicemail, dial ‘8’ during the greeting to access messages from outside phones.
The first time you access your voicemail, you are prompted to set up your mailbox by assigning a password (optional), recording a greeting and recording your name for the
Once your mailbox has been setup and you access it through prompt instructions, you may do the following:
Listen to messages (press 1)
If there are messages in your mailbox, press 1 to access them. TalkSwitch always starts with new messages before it plays back any older messages. You can perform the following actions during or after the message.
Dial 1: | Rewind 10 seconds |
|
|
Dial 11: | Rewind to beginning of message |
|
|
Dial 3: | Skip ahead 10 seconds |
|
|
Dial 33: | Skip to end of message |
|
|
Dial 5: | Listen to time and date stamp |
|
|
Dial 6: | Forward the message (with or without a note) |
|
|
Dial 7: | Delete message |
|
|
Dial 9: | Save message |
|
|
U S I N G T A L K S W I T C H | 1 0 1 |