Set Local Extension Hunt Group Access
By default, all line hunt groups for each local extension are enabled. If you wish to restrict access to some line hunt groups, you need to disable the line hunt groups at the local extension.
•Open the TalkSwitch Configuration software.
•Select System Information
•Click on Local Extensions.
•Click the Hunt Group Access button.
•Remove the check mark (by clicking it) next to the line hunt groups you do not want to allow for that local extension.
Repeat these steps for all your local extensions. When you allow access to line hunt groups that have ARS activated, the calls are routed through ARS
Direct Line Access
If you enable Direct Line Access on an extension, calls placed from that local extension are routed to the line hunt group you designated. If ARS is enabled on that line hunt group, the calls are routed through ARS.
T A L K S W I T C H C O N F I G U R A T I O N | 3 7 |
