Note: An administrator password must be set to avoid unauthorized access to system configuration, including external access to system commands.

Location Settings

Subject to the system model, a Location field may display in the System Information Administrator screen. If the field is shown, set it to the country where the system is being used. If different service providers are identified for the country, select the service provider to which the system’s telephone lines will be connected. Note that setting or resetting this parameter will change the system setting to the default values required for the country or service provider. The Location setting is shown in the bottom right hand corner of all configuration folder windows. If the Location field is not available on the Administrator page, the system is preconfigured for the location shown in the bottom right hand corner of the window.

2.3.3.2IP Configuration

This section applies to models with a LAN port when VoIP or remote configuration will be used. There are two methods of configuring the IP settings: automatic and manual.

Configure TalkSwitch IP settings:

Click on System information (to expand)

Click IP Configuration.

The Radio button Obtain IP and DNS information automatically” is selected.

2 0

T A L K S W I T C H U S E R G U I D E • U K & I R E L A N D

Page 28
Image 28
Talkswitch CT.TS005.001101.UK manual IP Configuration, Location Settings, Configure TalkSwitch IP settings