Sharp MD-X8 Recording from the built-in radio onto a MiniDisc, To interrupt recording

(Continued)

REC

MD

DISPLAY

MD REC

Recording from the built-in radio onto a MiniDisc

	F M S T		8 7 . 5	M H z
3	M D	0 1	0 : 0 0
					MD
	F M S T		8 7 . 5	M H z
5	M D	0 1	0 : 0 2
					MD

HRecording from the built-in radio onto a MiniDisc

1Tune in the radio station to be recorded.

2Load a recordable MiniDisc.

3Press the REC I button.

IThe unit will enter the record stand-by mode.

IAutomatic tuning is impossible while in the recording stand-by mode.

4Check the recordable time by pressing the DISPLAY button on the remote control.

5Press the MD 06 button.

IDuring recording, you cannot change the station.

Note:

IWhen recording from the AM band, put the unit in the recording stand- by mode. Then, before recording, separate the AM loop antenna from the main unit, and adjust the radio reception so that the AM station is tuned in clearly.

To interrupt recording:

Press the MD 06 button during recording.

Press the MD 06 button again to resume recording. The track number increases.

To record the track number during recording:

Press the REC I button.

To stop recording:

Press the MD H button.

After recording the track number, recording stops.

Notes:

IThe contents of a single recording are recorded under a single track number as a series of tracks.

IIf you use the monaural extended recording mode, you can make recordings that are about twice as long as stereo recordings. This is convenient for recording monaural broadcasts or talk programs. (Page 27)

29

*27-37 29 98.6.23, 10:32 AM