1-40

BEFORE USING THE MACHINE
Contents
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external accou nt module).

PERIPHERAL DEVICES

Peripheral devices can be installed on the machine to increase i ts range of functionality.
The peripheral devices are generally optional, however, some m odels include certain peripheral devices as standard
equipment.
(As of March, 2012)
PERIPHERAL DEVICES
Product name Product number Description
Document cover MX-VR11 This holds down the original.
Reversing single pass feeder
(Automatic document feeder) MX-RP15 This automatically turns the original over to enable scanning of
both sides.
Stand/500 sheet paper drawer MX-DE17 Additional tray. A maximum 500 sheets of paper can be loaded.
Stand/2x500 sheet paper drawer MX-DE18 Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
Low stand MX-DS16
These are stands on which the machine is set.
High stand MX-DS17
JOB SEPARATOR MX-TR11 This enables separation of output locations by mode (copy,
printer, etc.).
Exit tray unit
(Right tray) MX-TE10 When a finisher is installed, this can be added to the right side of
the machine.
Finisher MX-FN23 Output device that enables the use of the staple function and
offset function.
Printer expansion kit MX-PB15 Adds a PCL6 printer function. To install this kit, the hard disk
drive is required.
Network scanner expansion kit MX-NSX1 Adds a network scanner function.
Barcode font kit MX-PF10 Adds barcode fonts to the machine.
PS3 expansion kit MX-PK11 Enables the machine to be used as a Postscript co mpatible
printer.
Internet fax expansion kit MX-FWX1 Enables Internet Fax.
Facsimile expansion kit MX-FX11 Adds a fax function.
Application integration module MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
Application communication module MX-AMX2 This allows the machine to be linked over a network to an
external software application.
External account module MX-AMX3 This is required to use an external account application on the
machine.