Binding Cables

The power cord can be fastened using the supplied power cord clamp. This will prevent the power cord from being disconnected accidentally.

Also, the cables connected to the terminals on the back of the monitor can be neatly bundled using the supplied cable clamps as shown in the illustration below.

Cable clamp positions

 

 

 

Handle attachment

1

2

3

 

 

 

Hole for the

 

 

Band

Power cord clamp

Cable clamp

Fastened

Power card

 

 

part

clamp

 

 

Fastening the power cord

1.Attach the supplied power cord clamp to the power cord, making sure the power cord clamp is circular hole-sidedown.

2.Insert the tip of the band into the hole for the power cord clamp.

3.While holding the tail of the band, slide the fastened part toward the AC input terminal.

Attaching the Carrying Handles

When carrying the monitor, attach the two supplied carrying handles to the monitor as shown below.

To attach the carrying handles, remove the existing screws from the monitor, and attach the handles with the supplied screws. Keep the removed screws and return them to the original positions on the monitor when the carrying handles are removed.

 

For the monitor in horizontal orientation

For the monitor in vertical orientation

 

Attach the handles to the two positions on

Attach the handles to the two convenient

 

the top of the monitor.

positions shown below.

Handle attachment

▼Rear view

▼Rear view

 

Screw

 

 

Spacer

 

ENGLISH

17 E