Turning Power On/Off

Before turning on power, make sure that peripherals, external speakers, and the power cord are connected properly.

Caution

•If the monitor is connected to a PC or a playback device, turn on the monitor first before turning on the PC or playback device.

Turning on the main power switch

When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit.

Main power switch

ENGLISH

▼ Rear view

Set the main power switch to the “on” position.

Turning power on/off with the remote control unit

▼ Remote control unit

Press the POWER button to turn the power ON/OFF.

Power “On”: Power LED lights up green.

Power “Off”: Power LED lights up orange. (Standby mode)

▼ Front view

Power LED

Caution

•When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. Rapid switching may result in a malfunction.

TIPS

•When the input mode (see page 20) is set to “DIGITAL” or “ANALOG” and there is no video signal input, the backlight of the monitor is turned off and the monitor enters input signal waiting mode. (The power LED flashes green.) If the monitor is in this mode and you press the POWER button on the remote control unit, the monitor enters standby mode.

•If the remote control unit is not available, you can turn on/off the monitor by pressing the (power) switch beside the power LED with a pointed object.(See page 8)

19 E