Basic Operation (Continued)

Switching the screen size (When the input mode is COMPONENT/VIDEO)

Even when the screen size is changed, the display may remain the same depending on the input signal.

WIDE

ZOOM 1

ZOOM 2

 

 

 

An image with a 4:3 aspect

An image with a 4:3 aspect ratio

Use this size if ZOOM 1

ratio is stretched to fill the

is enlarged to fill the entire screen

cuts off the subtitles.

entire screen.

without changing the aspect

 

 

ratio.The upper and lower portion

 

 

of the image may be cut off.

 

NORMAL

DotbyDot

 

Displays the entire image of

Displays the dots of the

the aspect ratio of 4:3

input signals as the

without changing the aspect

corresponding dots on the

ratio.

screen.*

*When you select “DotbyDot” on the COMPONENT and the 525i (525p) video signal is input, the image quality cannot be changed by adjusting the value of “SHARPNESS” from the

VIDEO ADJUSTMENT menu.

TIPS

•Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful.

•When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

•When dual-screen display is selected, the screen size cannot be changed.

•When using the screen-size switching function of this monitor, the appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e.g. TV broadcast or video input from external equipment). Please consider this point when selecting the screen size.

•When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen size to “NORMAL”.

•When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges or top of the screen. This is due to the characteristics of the software, and is not a malfunction.

•Depending on the original image size (e.g. CinemaScope size), black bands may remain at the top and bottom of the screen.

E22