Controlling the Monitor with a PC

You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 38), you can make input mode selection/adjustment or can check the status of a specific monitor.

PC connection

......One-to-one connection with a PC

Basic operation

Connect with RS-232C straight cable between the PC’s COM port (RS-232C connector) and the RS-232C input terminal on the rear of the monitor.

ENGLISH

RS-232C input terminal

▼ PC

To COM port

RS-232C straight cable (commercially available)

35 E