Troubleshooting
Before calling for repair services, make sure following checks for possible remedies to the encountered symptoms.
Problem | Check item | Page | |||
|
|
|
|
| |
| • Is the power cord disconnected? | 15 | |||
| • Is the main power switch set to “OFF (O)”? | 19 | |||
| • Is the monitor in standby mode (the power LED | 19 | |||
There is no picture or sound. | illuminating in orange)? |
| |||
| • Make sure correct input mode is selected. | 20 | |||
| • If any external equipment is connected, make | – | |||
| sure the equipment is operating (playing back). |
| |||
|
|
|
|
| |
| • Are the batteries inserted with polarity ( , |
| ) | 18 | |
|
| ||||
| aligned? |
| |||
| • Are the batteries worn out? | 18 | |||
Remote control does not work. | • Point the remote control unit toward the monitor’s | 18 | |||
| remote control sensor. |
| |||
| • Is the menu display hidden or are settings | 34 | |||
| locked? |
| |||
|
|
|
|
| |
| • Are audio cables connected properly? | 11 to 14 | |||
Sound from left and right speakers is | • Make sure audio cables for external speakers are | 14 | |||
connected properly: left and right cables may be |
| ||||
reversed. |
| ||||
reversed or one of the two cables may not be |
| ||||
Sound is heard from only one side. |
| ||||
connected. |
| ||||
|
| ||||
| • Check the setting of BALANCE for AUDIO. | 29 | |||
|
|
|
|
| |
| • Is the sound muted? | 20 | |||
| • Make sure the volume is not set to minimum. | 20 | |||
| • Is the PC audio cable (commercially available) | 11 | |||
There is a picture but no sound. | connected? |
| |||
• Are audio cables connected properly? | 12 | ||||
| |||||
| • Is the audio signal input properly to the audio | 11 to 13, 20 | |||
| input terminal corresponding to the selected video |
| |||
| input terminal? |
| |||
|
|
|
|
| |
Faint color or bad hue. | • Check “COLORS” and “TINT” adjustments. | 29 | |||
• Make sure the connection sequence is correct. | 11 to 13 | ||||
| |||||
|
|
|
|
| |
| • The signal may be incompatible. | 12, 52 | |||
Unstable video | • Try the automatic screen adjustment when the PC | 33 | |||
analog RGB input terminal is used. |
| ||||
|
| ||||
ENGLISH
Power LED flashes red.
When “TEMPERATURE” is displayed
• Fan has a problem. | - |
Turn off the monitor and request repair from your |
|
SHARP dealer. |
|
• When the internal temperature of the monitor | 50 |
rises excessively, the brightness of the backlight |
|
decreases in order to prevent |
|
| |
cause of the excessive rise in temperature. |
|
49 E