Menu Items NSETUP, Nmonitor | Sharp PN-K321H manual

Menu Items

nSETUP

LANGUAGE

Sets the display language for the menu screen.

AUDIO SELECT

Selects the terminal used to input audio signals.

AUDIO INPUT LEVEL

Selects the maximum audio input level of the audio input terminal.

BAUD RATE

Selects the communication speed used for RS-232C communication.

DisplayPort STREAM

When using a screen resolution of 3840 x 2160 (50Hz/60Hz), select MST (Multi-stream).

Images may not be displayed properly with some video card combinations.

nMONITOR

MONITOR

Select the installation direction of the monitor.

LANDSCAPE	Landscape orientation
PORTRAIT	Portrait orientation

If the monitor is in a portrait orientation and a Windows PC is connected, set “Orientation” to “Portrait (Flipped)” in the “Screen Resolution” settings.

If you are using a different operating system, refer to the manual for your operating system.

STANDBY MODE

When STANDARD is selected, startup time from standby mode is reduced. Note, however that, more power will be consumed in standby mode.

When LOW POWER is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup time from standby mode becomes longer.

If set to LOW POWER, certain RS-232C commands cannot be used in standby mode. (See page 25.)

OFF IF NO OPERATION

Determines whether or not to set the monitor go into standby mode when no monitor button or RS-232C command operations are performed for over 4 hours.

E20

Image 20

Sharp PN-K321H operation manual Menu Items NSETUP, Nmonitor

Contents

PN-K321H Information on Disposal for Users private households Information on Disposal for Business UsersEuropean Union Other Countries outside the EU For Customers in U.K GREEN-AND-YELLOWBlue Brown Dear Sharp Customer Safety Precautions Tips and Safety Instructions For the monitor in landscape orientation For the monitor in portrait orientationBack Front Contents Supplied Components Attachment plate for stand Brightness adjustment button Part NamesNFront view NRear view Installing the stand supplied NAttaching the stand Adjusting the angle Installing the stand supplied NHeight/angle adjustmentAdjusting the height Connecting Peripheral Equipment Connection with a PC or AV equipment Connecting the Power Cord NStoring the cables Binding CablesNFastening the cables Turning Power On/Off Turning on the main powerTurning power on/off Power lamp status Status of the monitor Basic Operation Dot by Dot Basic Operation NSwitching the screen sizeWide Normal Menu Items Displaying the menu screenNExample of operation NMenu screen display NPICTURE Menu item detailsMenu Items Menu Items NSETUP NMONITOR Menu Items NOTHERS ALL Reset Adjustment LockTemperature Alert OSD Display Communication procedure PC connection NCommand formatControlling the Monitor with a PC RS-232C Communication conditions When a command has been executed correctly When a command has not been executedIf execution of the command is taking some time NCommunication interval RS-232C command table Power controlSetup menu Controlling the Monitor with a PC RS-232C Initialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C Monitor menuOthers menu Others Troubleshooting Vesa DDC2B SpecificationsNProduct Specifications Specifications NDimensional Drawings Unit inch mm Specifications NCompatible signal timing PC NPower managementScreen resolution Vsync DisplayPort NDDC plug and play Specifications NDisplayPort input terminal pins DisplayPort 20 pin NToppling prevention NRemoving the attachment plateTop of monitor Back of monitor PN-K321H Me EN13D3