7E
MOUNTING PRECAUTIONS
• This product is for use indoors.
• A mounting bracket compliant with VESA specications is
required.
• To install on a stand (commercially available) or on a wall,
or to remove or move the monitor, consult your dealer.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 25
degrees upward or 20 degrees downward.
• This monitor should be used at an ambient temperature
between 32°F (0°C) and 104°F (40°C). Provide
enough space around the monitor to prevent heat from
accumulating inside.
2
[5]
2
[5]
2 [5]
7-7/8 [20]
2
[5]
2
[5]
*
*
Unit: inch [cm]
For the monitor in landscape orientation
For the monitor in portrait orientation
7-7/8 [20]
2 [5]
Unit: inch [cm]
* When you install this monitor on a wall, the monitor
emits heat during operation, please be aware that this
heat may discolor or alter the wall.
• If it is difcult to provide sufcient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 32°F (0°C) to 104°F (40°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• When installing the
monitor in landscape
orientation, you can attach
the supplied horizontal
sticker (Operation buttons)
to the right side.
• Use the supplied vertical sticker when you install the
monitor in portrait orientation.
Attach the vertical sticker (Operation buttons) to
the back or the front.
• Back
• Front
Vertical sticker (Operation buttons)
Vertical sticker (Logo)
Cover
Sharp logo
Vertical sticker (Blank)
Vertical sticker (Operation buttons)
Horizontal sticker
(Operation
buttons)