Specifications
nDimensional Drawings
Note that the values shown are approximate values.
Unit: inch [mm]
[149.3]
[92.3]
Opening width
Opening height
VESA holes * | |||
[200] | [200] | ||
|
[100] [100]
When mounting the monitor, be sure to use a
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch
(8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
nPower management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
DPMS: Display Power Management Signaling
DPMS | Screen | Power | Hsync | Vsync |
consumption*1 | ||||
ON STATE | Display | 510 W | Yes | Yes |
|
|
|
|
|
STANDBY | No |
| No | Yes |
| 1.0 W*2 |
|
| |
SUSPEND | Yes | No | ||
| display |
|
|
|
OFF STATE |
| No | No | |
|
|
*1 When
connected.
*2 When AUTO INPUT CHANGE is set to OFF.
DMPM: Digital Monitor Power Management
DMPM | Screen | Power |
consumption*1 | ||
Monitor ON | Display | 510 W |
Active OFF | No display | 1.0 W*2 |
nPOWER LIMITED (See page 24.)
MODE | Power consumption |
|
|
MODE2 | 195 W |
MODE1 | 310 W |
OFF | 510 W |
Set to ensure maximum power consumption. (See page 55.)
nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
E56
