Sharp PN-Y325 operation manual Binding Cables, Setting the USB flash drive cover, 15 E

Binding Cables

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp.

Attach the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables.

Cable clamp

Cable clamp

attachmentCable

Setting the USB flash drive cover

1. Insert the USB flash drive into the USB port.

2.Attach the USB flash drive cover and secure with the provided screw.

USB flash drive cover screw

USB port

TIPS

•If the USB flash drive will be attached, use a USB flash drive with dimensions no greater than 1-15/16 inch (50 mm) (L) × 13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).

15 E