Memory program entry
You can change memory programs for memory banks. See time cooking on page 11.
R-22GT/23GT/24GT/25JT
Memory banks | 20 |
Cooking stage
Memory NO.1
Memory NO.
|
|
Memory banks | 10 |
Cooking stage | 1 stage |
The
Setting time and power level
*Suppose you want to set 4 minutes at 60% for the 1st stage and 2 minutes at 30% for the 2nd stage for 1 serving in memory
ProcedureDisplay
SET | x 2 |
|
|
1 Touch SET pad twice | NO. |
| |
within 2 sec. |
| ||
|
| ||
|
| ||
|
|
|
|
| 1 |
|
|
|
2 Touch number pad. | NO. |
| ||
|
|
| ||
SELECTATIME |
|
| ||
4 | 0 | 0 |
|
|
|
|
3Enter cooking time for 1st stage.
SELECTAPOWER | 6 |
| |
|
|
Note: 1. (For
Touch SELECTAPOWER twice for High power when programming stages. If High is the power level of the last stage, it is not necessary to touch SELECTAPOWER at all.
2.If you want to set memory
3.If the cooking time is over the maximum time, the display will show “EE 9”. See page 11.
4.At step 1, no audible signal will be heard when the SET key is touched the first time. An audible signal will sound when the SET key is touched the second time.
Setting magnification factor
Ovens are shipped with a magnification factor of 1.8 for DOUBLE QUANTITY.
You can change the magnification factor for double quantity and have it stored in the memory.
*Suppose you want to set the magnification factor to 1.67 for double quantity in memory 1.
ProcedureDisplay
| SET | x 2 |
|
| |
|
|
| |||
1 | Touch SET pad twice |
|
| ||
| within 2 sec. | NO. |
| ||
|
|
| |||
| DOUBLE |
|
| ||
|
|
| |||
| QUANTITY |
|
| ||
2 | Touch | DOUBLE | NO. X2 |
| |
| QUANTITY pad. |
| |||
|
|
| |||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
|
|
|
3 | Touch number pad 1. | NO. X2 |
| ||
|
|
|
|
|
|
| SELECTATIME |
|
| ||
|
|
| |||
4 | TouchSELECTATIME | X2 |
| ||
| pad. |
|
| ||
|
|
|
| ||
|
|
|
|
4 Enter power level in 1st stage.
SELECTATIME
2 0 0
5Enter cooking time for 2nd stage.
1 6 7
5 Touch NUMBER pads
1,6 and 7.
SET | x 2 |
6 Touch SET pad twice.
X2
SELECTAPOWER | 3 |
| |
|
|
6Enter power level for 2nd stage.
SET x 2
7 Touch SET pad twice.
Note: 1. In case you want to change the magnifi- cation factor it must be set for each pad separately.
2.The magnification factor can be set from 0.00 to 9.99.
3.At step 1, no audible signal will be heard when the SET pad is touched the first
time. An audible signal will sound when
9the SET pad is touched the second time.