INSTALLATION

INSTALLATION

Because your Sharp Commercial Microwave Oven will be used frequently, place it so that there is easy access for all users.

1.Be sure all electrical requirements are met. See page 5.

2.Exhaust vents are on the back of the unit near the top. Install the unit at least 2 inches away from the nearest wall to permit adequate ventilation for proper cooling and air flow in the oven.

3.Install the unit where no excessive heat or steam are generated. Do not place next to an oven or cooking surface.

4.The unit may be secured to a countertop or stand. There is a screw hole in the bottom of the unit. After the oven is permanently placed, drill a hole through the counter top for a 3/16 inch self-tapping screw. The hole should be 12 inches from the hinge side of the oven door and 51/4 inches back from the front edge of the removable filter.

5.STACKING PROCEDURE FOR TWO MICROWAVE OVENS

Two units can be installed together by placing one on top of the other. Follow these instructions:

a.Place oven A in the desired location. Position Oven B on top of Oven A as shown in the figure.

b.Remove Screws (b) from the lower edge of the back of Oven B.

c.Loosen Screw (a) which holds Mounting Plate A on the back of Oven A.

d.Turn Mounting Plate A 180° so that it is on the lower edge of Oven B.

e.Using Screw (b) removed in step b, install Mounting Plate A to the lower edge of Oven B as shown in the figure.

f.Tighten Screw (a) which was loosened in step c.

g.Remove another Screw (a) which holds Mounting Plate B on the back of Oven B. Remove Mounting Plate B.

h.Replace Screw (a) removed in step g and tighten.

i.Remove Screw (c) from the rear of Oven A.

j.Remove Screw (d) from the rear of Oven B.

k.Turn Mounting Plate B and position it on Ovens A and B as shown in the figure. Using Screws (c) and (d), fasten Mounting Plate B in place.

WARNING:

When two ovens are installed together by placing one on top of another:

1.Always use two mounting plates.

2.Make sure that the power supply cords are not caught between the ovens.

3.Do not install more tha one oven on top of another.

Screw (a)

Oven B (Back)

 

Rear cabinet

Mounting plate A

Screw (b)

Screw (d)

 

Screw (c)

Screw (a)

 

Oven A (Back) Rear cabinet

Mounting plate B

 

Figure

6

Page 7
Image 7
Sharp R-23GT, R-22GT, R-24GT, R-25JT operation manual Installation

R-23GT, R-25JT, R-24GT, R-22GT specifications

The Sharp R-22GT, R-24GT, R-25JT, and R-23GT are a series of microwave ovens that embody Sharp's commitment to quality, innovation, and user-friendly technology in kitchen appliances. These models are designed to meet a variety of cooking needs, whether for quick reheating, defrosting, or preparing home-cooked meals.

One of the standout features across these models is Sharp's advanced inverter technology, which provides a steady stream of power for precise cooking. Unlike traditional microwave ovens that pulse on and off to reduce power, inverter technology delivers consistent heat. This results in evenly cooked dishes, retaining the natural flavor and nutrients of ingredients while preventing overcooking.

The R-22GT, R-24GT, R-25JT, and R-23GT come equipped with an array of pre-programmed cooking functions, allowing users to simply select the food type for optimal heating. These smart settings ensure perfect results for popular dishes. The easy-to-use control panel is designed for convenience, allowing for straightforward navigation through various functions, making it accessible for users of all ages.

In terms of capacity, the R-25JT offers the largest internal space, reaching 25 liters, which makes it ideal for family cooking or larger meals. The R-24GT includes a 24-liter capacity, while the R-22GT and R-23GT models provide 22 liters, ensuring sufficient space for everyday cooking tasks. Each model is designed with a sleek and stylish exterior, complementing modern kitchen aesthetics while being functional.

Sharp's attention to design extends to the interiors, which are crafted from easy-to-clean materials that resist stains and odors. Additionally, the child safety lock feature provides peace of mind for families with young children, preventing accidental operation.

Energy efficiency is another key characteristic of these models. By utilizing efficient microwave technology, they minimize electricity consumption without sacrificing cooking performance, making them an eco-friendly choice for the environmentally conscious consumer.

With their combination of functionality, style, and innovative technology, the Sharp R-22GT, R-24GT, R-25JT, and R-23GT microwave ovens represent an excellent addition to any kitchen, ensuring delightful cooking experiences for users looking to embrace convenience without compromising on quality.