Sharp R-24GT, R-22GT Before Operation, Memory Operation, Cooking double quantity with memory

Models: R-23GT R-25JT R-24GT R-22GT

1 24
Download 24 pages 59.57 Kb
Page 9
Image 9
BEFORE OPERATION

BEFORE OPERATION

*Before operating your new oven, make sure you

read and understand this operation manual com- pletely.

1)Plug in the oven.

*The digital display will then show MEMORY OPERATION .

2)You can input the pads only when the door is closed.

3)Oven light and fan motor work for 1 minute whenever the door is opened or after cooking.

4)The program and the check are canceled when any pads are not touched for more than 3 minutes.

5)During cooking, except memory cooking, the oven stops when the door is opened, and the program is canceled if the START pad is not touched within 1 minute after the door is closed.

6)The cooking is canceled when the door is opened during memory cooking.

MEMORY OPERATION

The R-22GT, R-23GT, R-24GT and R-25JT mod- els have 20 and R-22GV model has 10 memory banks which can store cooking programs.

The first ten memory banks have been pro- grammed previously as follows, but they can be changed. See page 9.

Memory No.

Cook Time

Output Power

1

10 sec.

100%

Cooking double quantity with memory

Double quantity means the best time for cooking two servings or twice the amount programmed in the memory pad; it is not double the time.

*Suppose you want to cook 2 servings by memory number 1.

2

20 sec.

100%

3

30 sec.

100%

4

45 sec.

100%

5

1 min.

100%

6

1 min. 15 sec.

100%

7

1 min. 30 sec.

100%

8

2 min.

100%

Procedure

DOUBLE

QUANTITY

1Place food in oven. Touch DOUBLE QUANTITY pad.

Display

NO. X2

9

2 min. 30 sec.

100%

0

3 min.

100%

1

2 Touch number pad.

NO. X2

Information in these memory banks is not lost due to power interruptions. If the power goes off, the oven does not need to be reprogrammed. No batteries are necessary for this type of memory.

Cooking with memory

*Suppose you want to cook by using memory 1, which was programmed for 10 seconds at 100%.

ProcedureDisplay

 

1

 

 

1 Place food in oven.

NO.

Touch number pad.

 

After about 1 sec.

 

 

 

 

 

 

ON

 

 

 

 

After about 1 sec.

ON X2

Note: The “MEMORY” cooking system does not require the use of the START pad. Memory pad cannot be used to start the oven if any program is on display.

If the door is opened during memory cook- ing, the program is canceled. To stop the cooking of a memory pad and then restart, first, touch the STOP/CLEAR pad, then open the door, check food, close door and touch START.

If your programmed time is over maximum time at Double Quantity, you cannot use Double Quantity for the memory. You can cook only 1 serving. See page 11.

Note: (For R-22GT/23GT/24GT/25JT)

If you want to cook by using memory 11-20, touch the desired number pad twice within 1 second.

8

Page 9
Image 9
Sharp R-24GT, R-22GT, R-25JT Before Operation, Memory Operation, Cooking double quantity with memory, Cooking with memory