Sharp R-395F(S), R-330F J Before Operating, Getting Started, Clock Setting, Stop/Clear

BEFORE OPERATING

Getting Started

Step	Procedure	Pad Order			Display
	Plug the oven into a power point and switch
1	on the power.
	Ensure the oven door is closed.
				Flashing	eights
	Press the STOP/CLEAR pad so that the
			STOP
2	oven beeps.		CLEAR
				Only the dots will remain.

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step	Procedure	Pad Order			Display
	Press the TIMER/CLOCK pad.
			TIMER
1			CLOCK
				The dots (:) will flash on and
				off.
2	Enter the correct time of day by pressing
	the numbers in sequence.
	Press the TIMER/CLOCK pad again.
3			TIMER
			CLOCK

This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45), will appear in the display. Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

6