A&D AD-4212B-101/102/201/301 Connection to Peripheral Equipment, Mode Prt, AD-8121B settings

17. CONNECTION TO PERIPHERAL EQUIPMENT

17-1 Connection to the AD-8121B Printer

Set the following parameters to use the AD-8121B printer.

	Class		Item	Factory				AD-8121B
				setting			Mode 1	Mode 2		Mode 3
			prt		0		0, 1, 2, 4, 5	3	0, 1, 2, 4, 5
			Data output mode
			ap-p		0
			Auto print polarity				**1	Not	*1
			ap-b		1			applicable
			Auto print difference
			d-no		0		0	0	0, 1
	dout		Data number output
	Data output		5-td		0		0	0	0,1, 2, 3
			Time/date output
			5-id		0		0	0	0,1
			ID number output
			pUse		0		0	0	0,1 *2
			Data output pause
			at-f		0		0	0	0,1
			Auto feed
			bp5		2		2	2	2
			Baud rate
			ptpr		0		0	0	0
			Data bit, parity bit
	5if
			Crlf
	Serial				0		0	0	0
			Terminator
	interface
			type		0		0	0	1
			Data format
			Ct5		0		0	0	0
			CTS, RTS control
*1		Set the parameter when the data output mode is set to the auto print mode (prt 1 or prt 2).
*2		When multiple lines are to be printed, set the parameter to 1.
Note
AD-8121B settings
	Mode		AD-8121B DIP switches					Description
	Mode 1					Prints upon data receipt
						Standard mode, statistical calculation mode
	Mode 2					Prints using the AD-8121B DATA key or the AD-8121B
						built-in timer
						Standard mode, interval mode, chart mode
	Mode 3					Prints upon data receipt
						Dump print mode
DIP switch 3: Handling unstable data
			ON = To print unstable data				OFF = Not to print unstable data
DIP switch 4: Data input specification
			ON = Use the current loop				OFF = Use the RS-232C

65