67
Using the WinCT software, the balance can do the following:
1 Analyzing the weighing d ata and the statistics with “RsKey”
The weighing data can be input directly into an Excel worksheet. Then, Excel can analyze the
data to obtain total, average, standard deviation, maximum and minimum value, and display
them in a graph.
2 Controlling t he balance using commands from a personal computer
By using “RsCom”, the personal computer sends commands such as “re-zero” or “send
weighing data” to the balance and controls the balance.
3 Printing the balance GLP report using your printer
The balance GLP report can be printed using a printer connected to the personal computer.
4 Receiving w eighing data at a certain interval
The weighing data can be received at a certain interval and data characteristic with elapsed
time can be obtained.
5 Using the AD-421 2A/B series balance memory function
The data can be stored in the balance’s memory. Of the data stored, the weighing data and
calibration data can be transmitted to a personal computer at one time.
6 Using a personal computer as an external indicator
With the “RsKey” test mode function, a personal computer can be used as an external weight
indicator for the balance. (To do this, set the balance data output mode to stream mode.)