47
11-2 GLP Report
Set the following parameters to output the report.
To print the report, set the “GLP output ( info )” parameter to “1” and use MODE 3 of the
AD-8121B. For details on using the printer, refer to “17-1 Connection to the AD-8121B Printer”.
To output the report to a personal computer using the RS-232C interface, set the “GLP output
( info )” parameter to “2”.
If the time and date are not correct, set the correct time and date in “Clock ( Cl adj )” of the
function table.
Note
For operational details about calibration and calibration test, refer to “8. CALIBRATION”.

Calibration report

When the setting is “info 1”: When the setting is “info 2”:

AD-8121 format General data format

Manufacturer

Model

Serial number

ID number

Date

Time

Calibration type

Calibration

weight

Signature

CALIBRATED(EXT.)
CAL.WEIGHT
1234+50.00000 g
SIGNATURE
- - - - - - - -
A&D
　
S/N
ID
DATE
TIME
AD4212B-102
01234567
ABCDEFG
2000/12/31
12:34:56
A & D<TERM>
AD4212B-102<TERM>
S/N 01234567<TERM>
ID ABCDEFG<TERM>
DAT E<TERM>
200 0/12/ 31<TERM>
TIM E<TERM>
12:34:56<TERM>
CAL IB RAT ED( EXT .)<TERM>
CAL.WEIGHT
+50.00000 g<TERM>
SIG NA TUR E<TERM>
<TERM>
<TERM>
----------------<TERM>
<TERM>
<TERM>
<TERM> CRLFCR

Space, ASCII 20h

Terminator, , or

Carriage return, ASCII 0Dh

Line feed, ASCII 0Ah

CR
LF