A&D AD-4212A/B, AD-4212B-101/102/201/301 Clock and Calendar Function, Confirming the time

10-9 Clock and Calendar Function

The balance is equipped with a clock and calendar function. When the “GLP output (info)” parameter is set to “1” or “2” and the “Time/Date output (5-td)” parameter is set to “1”, “2” or “3”, the time and date are added to the output data. Set or confirm the time and date as follows:

Operation

1Press and hold the SAMPLE key until ba5fnc function table is displayed, then release the key.

2Press the SAMPLE key several times to display

of the

Cl adj .

3Press the PRINT key. The balance enters the mode to confirm or set the time and date.

Confirming the time

4The current time is displayed with all the digits blinking. When the time is correct and the date does not need to be confirmed, press the CAL key and proceed to step 8.

When the time is correct and the date is to be confirmed, press the SAMPLE key and proceed to step 6.

When the time is not correct and is to be changed, press the RE-ZERO key and proceed to step 5.

Setting the time (with part of the digits blinking)

5 Set the time in 24-hour format using the following keys.

SAMPLE			key		To select the digits to change the
						value. The selected digits blink.
				key	To increase the value by one.
RE-ZERO
		key			To decrease the value by one.
MODE
		key			To store the new setting, display
PRINT
							and go to step 6.
						end
	key				To cancel the new setting and go
CAL
						to step 6.

40