A&D AD-4212A/B Auto print polarity, Data memory, Interval time, Time/Date output, Auto feed

Class	Item and Parameter		Description
	ap-p	0	Plus only	Displayed value>Reference
		1	Minus only	Displayed value<Reference
	Auto print polarity
		2	Both	Regardless of displayed value
	ap-b	0	10 digits	Difference between reference
		1	100 digits
	Auto print difference			value and displayed value
		2	1000 digits
		0	Not used
	data	1	Stores unit mass in counting mode	Related items:
		2	Stores weighing data
	Data memory			prt,int, d-no, 5-td, info
		3	Stores calibration data
		4	Stores upper/lower limit values
		0	Every measurement
		1	2 seconds
dout		2	5 seconds	Interval time in the interval
	int	3	10 seconds
Data output		4	30 seconds	memory mode when using prt 3,
	Interval time
				data 2
Not displayed		5	1 minute
		6	2 minutes
when BCD
		7	5 minutes
output (OP-01)
		8	10 minutes
is installed.
	d-no	0	No output	Refer to "14. DATA MEMORY".
	Data number output	1	Output
		0	No output	Selects whether or not the time
	5-td	1	Time only	or date is added to the weighting
	Time/Date output	2	Date only	data. For details, refer to "10-9
		3	Time and date	Clock and Calendar Function".
	5-id	0	No output	Selects whether or not the ID
	ID number output	1	Output	number is output.
	pU5e	0	No pause	Selects the data output interval.
	Data output pause	1	Pause (1.6 seconds)
	at-f	0	Not used	Selects whether or not automatic
	Auto feed	1	Used	feed is performed.
		0	No output	Selects GLP output method.
	info	1	AD-8121 format	For how to set time and date to
	GLP output			be added, refer to “10-9 Clock
		2	General data format	and Calendar Function”.
	ar-d	0	Not used	Adjusts zero automatically after
	Zero after output	1	Used	data is output.

Factory setting

Note: “Digit” is a unit of minimum weighing value

31