Specifying a
Trigger
Condition
HP 16510B
To capture the data and place the data of interest in the center of the display of the state listing menu, you need to tell the state analyzer when to trigger. Since the first event of interest is address 0000, you need to tell the state analyzer to trigger when it detects address 0000 on the address bus.
1.Display the State Trace Specification menu.
a.Touch the field second from the left at the top of the screen.
b.Touch the field labeled Trace 1.
Figure 8-13. State Trace Specification Menu
2.Set the state analyzer so that it triggers on address 0000. a. Touch the 1 in the Sequence Levels field of the menu.
