HP 16500A manual Introduction Probing Options, HP 16510B Probing Front-panel Reference

Probing

Introduction

Probing

Options

2

This chapter contains a description of the probing system of the

HP 16510B logic analyzer. It also contains the information you need to connect the probe system components to each other, to the logic analyzer, and to the system under test.

You can connect the HP 16510B logic analyzers to your system under test in one of four ways:

∙HP 10320C User-definable Interface (optional)

∙HP 10269C with microprocessor specific modules (optional)

∙the standard HP 16510B probes (general purpose probing)

∙direct connection to a 20-pin 3M® Series type header connector using the optional termination adapter (HP Part No. 01650-63201).

The optional HP 10320C User-definable Interface module combined with the HP 10269C General Purpose Probe Interface (optional) allows you to connect the HP 16510B logic analyzer to your target system. The HP 10320C includes a breadboard (HP 64651B) which you custom wire for your system.

Also available as an option that you can use with the HP 10320C is the HP 10321A Microprocessor Interface Kit. This kit includes sockets, bypass capacitors, a fuse for power distribution, and wire-wrap headers to simplify wiring of your interface when you need active devices to support the connection requirements of your system.

HP 16510B	Probing
Front-panel Reference	2 - 1