This also occurs for DATA, as shown:
Overlapping
Timing
Waveforms
Figure 12-16. Individual Data Labels
If you want to see the waveforms of each bit, you would leave the display as it is. However, this makes the waveform display very crowded. An easy solution is overlapping the waveforms.
A convenient method of displaying the waveforms of all the bits in ADDR and DATA is to overlap them. To overlap the bits for ADDR and those for DATA, follow these steps.
1.Delete all the ADDR and DATA bit labels that were put in the label field in the last section.
HP 16510B | Using the Timing/State Analyzer |
