HP 16500A, 16510B manual Div seconds- per-division Field, Interpreting the Display 6

The next field to the right of the At____ marker field will pop up when

selected and show you all the labels assigned to the timing analyzer as shown below.

s/Div (seconds- per-division) Field

Note

Interpreting the Display 6 - 8

Figure 6-8. Label Option Pop-up

The seconds-per-division field allows you to change the time window of the Timing Waveforms menu.

To activate the s/Div field you must touch the field. The field will turn light blue indicating it can be controlled by the knob. The knob can increment or decrement the s/Div setting in a 1-2-5 sequence. If you touch the field again, a pop-up appears. Using the keypad on the pop-up you can change the seconds-per-division by entering integers and units. The range for the s/Div field is 10 ns/div to 100 s/div.

When you enter a value from the keypad, the seconds-per-division does not have to be a 1-2-5 sequence.

Sample period is fixed at 10 ns in the Transitional acquisition mode. In Glitch mode, changing the s/Div setting changes the sample period for the next run. To view the sample period after the next run, turn the markers off if they are on and touch Run.

HP 16510B

Front-Panel Reference