The listing area shows the data the state analyzer acquires. The data is displayed in a listing format as shown below.
Figure 6-10. State Listing Menu
This listing display shows you 16 of the possible 1024 lines of data at one time. You can use the knob to roll the listing to the lines of interest.
The column of numbers at the far left represent the location of the acquired data in the state analyzer’s memory. The trigger state is always 0. At the vertical center of this column you will see a box containing a number. The box is used to quickly select another location in the state listing.
The rest of the columns (except the Time/States column) represent the data acquired by the state analyzer. The data is grouped by label and displayed in the number base you have selected (hexadecimal is the default base). The Time or States column is on when you select either of these in the Count field of the Trace Menu.
The Time column displays either the Relative time (time from one state to the next) or Absolute time (time from each state to the trigger). The States column displays the number of qualified states Relative to the previously stored state or the trigger (absolute).
HP 16510B | Interpreting the Display |
6 - 11 |
