HP 16510B, 16500A manual Accessories Supplied, Key Features

Key Features

Accessories Supplied

Two 3.5-inch disk drives are integral to the instrument for storing logic analyzer configurations and acquired data. The disk drive also provides a way of loading inverse assembly configuration files into the logic analyzer for configuring ease.

Additional key features of both models include:

∙Transitional timing for extended timing analyzer memory

∙Lightweight passive probes for easy hook-up

∙All channels can be used for state or timing at the maximum sample rate

∙HP-IB and RS-232C interface for programming and printer dumps

∙An external trigger BNC connector

∙Efficient package size

∙Transitional or glitch timing modes

∙1k-deep memory on all channels

∙Glitch detection

∙Marker measurements

∙Triggering and pattern qualification

∙Overlapping of timing waveforms

∙Eight sequence levels

∙Eight pattern recognizers

∙One range recognizer

∙Time and number-of-states tagging

∙Pre-store

∙Auto-scale

∙Programmability

∙Cross-domain triggering

∙Interactive measurements

∙Mixed-mode display

∙Oscilloscope type controls in the timing analyzer

∙State Compare, Chart, and Waveform displays

Table 1 lists the accessories supplied with your HP16510B. If any of these accessories were missing when you received the logic analyzer from the factory, contact your nearest Hewlett-Packard office. If you need additional accessories, refer to the Accessories for the HP 1650A/HP 1651A and HP 16500A Logic Analyzers data sheet.

HP 16510B	General Information
Front-panel Reference	1 - 3