Glitch Triggering. When you set the Acquisition mode on Glitch, a glitch detection field for each label is added to the screen. These fields allow you to specify glitch triggering on your timing analyzer. Selecting one of these fields brings up the following pop-up menu.

Figure 5-45. Specify Glitch Pop-up for Then Find

Your pop-up may look different depending on the number of channels you have assigned to the label. Each period indicates that the channel has not been specified for glitch triggering.

To specify a channel for glitch triggering, place the cursor on one of the periods and touch the asterisk. The period is replaced with an asterisk, indicating that the logic analyzer will trigger on a glitch on this channel.

Note

 

 

 

 

If you select < (less than) in the present for field, edge and glitch

 

 

 

 

 

 

 

 

 

 

 

 

 

triggering are turned off. The Then find Edge or Glitch fields no longer

 

 

 

 

 

 

 

 

 

 

appear on the screen. The logic analyzer triggers on only the pattern

 

 

 

 

 

specified in the Find Pattern fields.

 

 

 

 

 

 

HP 16510B

Menus

Front-Panel Reference

5-41