4Count The Count field allows you to place tags on states so you can count them. Counting cuts the acquisition memory in half from 1k to 512, and the maximum clock rate is reduced to 16.67 MHz.
Selecting this field gives you the following
Figure 5-71. Count Pop-up Menu
Off. If you select Off, the states are not counted in the next measurement.
Time. If you select Time counting, the time between stored states is measured and displayed in the State Listing under the label Time. The time displayed can be either relative to the previous state or to the trigger. The maximum time between states is 48 hours.
HP 16510B | Menus |
