Re-acquiring the Data

4.Touch the ADDR label field under Labels.

5.Touch the DATA label field under Labels. The screen should look like that shown below.

Figure 12-19. Overlapped Waveforms

In the long blue label field ADDR and DATA have "all" next to them to show that the bits are overlapped. Touch the Done field to close the pop-up.

Now you are ready to acquire the data. Touch Run. The logic analyzer will display the timing waveforms, unless you switched to one of the state analyzer menus, in which case the state listing will be displayed. Regardless of which menu is displayed, change the display to the Mixed Mode Display.

HP 16510B

Using the Timing/State Analyzer

Front-Panel Reference

12-17

Page 221
Image 221
HP 16510B, 16500A manual Re-acquiring the Data, Overlapped Waveforms