Waveform Display
Time Interval
Accuracy
Sec/div: 10 ns to 100 s; 0.01% resolution.
Delay: −2500 s to 2500 s; presence of data dependent on the number of transitions in data between trigger and trigger plus delay (transitional timing).
Accumulate: Waveform display is not erased between successive acquisitions.
Overlay Mode: Multiple channels can be displayed on one waveform display line. Primary use is to view summary of bus activity.
Maximum Number Of Displayed Waveforms: 24
Channel to Channel Skew: 4 ns typical.
Time Interval Accuracy: ± (sample period +
Trigger Specification
Asynchronous Pattern: Trigger on an asynchronous pattern less than or greater than specified duration. Pattern is the logical AND of specified low, high, or don’t care for each assigned channel. If pattern is valid but duration is invalid, there is a 20 ns reset time before looking for patterns again.
Greater Than Duration: Minimum duration is 30 ns to 10 ms with 10 ns or 0.01% resolution, whichever is greater. Accuracy is + 0 ns to −20 ns. Trigger occurs at pattern + duration.
Less Than Duration: Maximum duration is 40 ns to 10 ms with 10 ns or 0.01% resolution, whichever is greater. Pattern must be valid for at least 20 ns. Accuracy is + 20 ns to −0 ns. Trigger occurs at the end of the pattern.
Glitch/Edge Triggering: Trigger on glitch or edge following valid duration of asynchronous pattern while the pattern is still present. Edge can be specified as rising, falling or either. Less than duration forces glitch and edge triggering off.
Specifications and Operating Characteristics | HP 16510B |
|
