HP 16500A, 16510B manual Setting, State Analyzer Arms Timing Analyzer

Setting the	Your timing measurement requires the timing analyzer to display the
Timing Analyzer	timing waveforms present on the buses when the routine is running. Since
	you triggered the state analyzer on address 8930, you want to trigger the
Trigger
	timing analyzer so the timing waveforms can be time correlated with the
	state listing.
	To set up the logic analyzer so that the state analyzer triggers the timing
	analyzer, perform these steps:
	1.	Display the Timing Trace Specification menu (Trace 2).
	2.	Touch the field labeled Armed by Run.
	3.	In the pop-up, touch the field labeled 68000STATE.
	Your timing Trace specification should match the menu shown:

State Analyzer Arms

Timing Analyzer

Figure 12-8. Armed by 68000STATE

Using the Timing/State Analyzer	HP 16510B
12-10	Front-Panel Reference