HP 16510B, 16500A manual Packaging Tagging for Service

Packaging

Tagging for Service

The following general instructions should be used for repacking the module with commercially available materials.

∙Wrap module in anti-static plastic.

∙Use a strong shipping container. A double-wall carton made of 350 lb. test material is adequate.

∙Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all sides of the module to provide firm cushioning and prevent movement inside the container.

∙Seal shipping container securely.

∙Mark shipping container FRAGILE to ensure careful handling.

∙In any correspondence, refer to module by model number and board number.

If the module is to be shipped to a Hewlett-Packard office for service or repair, attach a tag showing owner (with address), complete board number, and a description of the service required.

HP 16510B	Installing New Logic Analyzer Boards into the Mainframe
Front-Panel Reference	A-7