Using the components
Special bodypack transmitter/radio microphone settings
The following special settings can only be made via the bodypack transmitter’s/radio microphone’s oper- ating menu. An overview of this operating menu is given from page 49 onwards.
Switching the bodypack transmitter’s line input on/off
You can connect an audio source such as a CD player, MP3 player, etc. to the bodypack transmitter’s line input. If you have connected an audio source, you then have to switch on the line input as follows:
Press the SET button .
The operating menu appears and the first menu item “CHAN” flashes on the display.
Repeatedly press the / rocker button in the direction until “LINE” flashes on the display.
Press the SET button .
If the line input is switched off, “LINE.OFF” flashes on the display; if the line input is switched on, “LINE.ON” flashes on the display.
Press the / rocker button | to change the |
setting. |
|
Press the SET button to permanently store the setting.
“STORED” briefly appears on the display.
Adjust the sensitivity of the line input to match the connected audio source as described in the follow- ing section.
40
