Sennheiser 2020 Charging the BA 2015 accupack, However, the charging process may take longer if

Using the components

Charging the BA 2015 accupack

To charge the accupack of the radio microphone or bodypack transmitter:

Remove the accupack as described on page 26 or page 27.

Place the accupack into the charging compartment for accupack/bodypack transmitter as shown in the diagram on the left.

The red LED CHARGE/ERROR of the charging compartment lights up.

After the accupack has been fully charged, the green LED READY lights up.

Notes:

•Charging a completely discharged accupack takes approx. 3½ hours at room temperature. It is normal for the accupacks to get hot during charging.

•However, the charging process may take longer if:

•the accupack is deep-discharged and first has to be reconditioned by a deep discharge recovery charge,

•the ambient temperature is close to or over 40°C, since, in order to protect the accupack, the charging process will be interrupted until the temperature has dropped to a safe level.

•For safety reasons, each charging process will be interrupted after 4 hours.

•When not using the BA 2015 accupack for extended periods of time, charge it about every three to six months.

33